Beacon Power Corp. has been awarded a subcontract to provide a flywheel energy storage system in support of a wind integration R&D project sponsored by the California Energy Commission. Beacon will receive approximately $250,000 to offset R&D expenses and will contribute an additional $90,000 of engineering resources for the project, bringing the R&D total to approximately $340,000.
In addition to the California Energy Commission, which is funding the project, other leading stakeholders include Southern California Edison and the California Independent System Operator (ISO). The flywheel system will be installed in Tehachapi, California, a high-potential wind resource area where, according to a report from the California ISO, up to 4,200 MW of wind power may be added in the coming years.
In its November 2007 report entitled “Integration of Renewable Resources,” the California ISO forecasted the need for hundreds of megawatts of additional frequency regulation capacity due to the impact of increasing wind deployment and its associated intermittency. Frequency regulation is a service that balances electricity supply and demand to maintain grid stability. Beacon Power’s regulation plants can address this need, and Beacon has already successfully demonstrated this capability in California.
In addition to highlighting the use of energy storage for frequency regulation, the report outlines other changes that will be required on the California grid to achieve the state’s goal of 20% renewable energy by 2010. These include the need to address transmission constraints. Beacon’s flywheel energy storage systems may also have the potential to address shortages in transmission line capacity, which this wind power integration project is intended to prove.
The primary goal of the project is to demonstrate that advanced control technology with energy storage can help expand the delivery of renewable wind energy by effectively increasing the capacity of constrained transmission facilities in the Tehachapi area. This project supports California’s goal to upgrade and expand its electricity transmission and distribution infrastructure per the state’s Energy Action Plan of 2003.
As a key subcontractor on the project, Beacon Power will work with the prime contractor, Alternative Energy Systems Consulting, and be responsible for implementing the energy storage portion of a system that:
The flywheel system used for the project will be the reconditioned scale-power Smart Energy Matrix that Beacon provided to the California Energy Commission in 2005-2007 to successfully demonstrate frequency regulation performance.