EPRI Publishes 480-V Distribution Arc Flash Updates
Aug. 1, 2012
In the 2012 National Electrical Safety Code, the approach for arc flash below 1,000 V has changed. Now, utilities will have to review arc flash on distribution
In the 2012 National Electrical Safety Code, the approach for arc flash below 1,000 V has changed. Now, utilities will have to review arc flash on distribution secondary equipment. The two main changes are at 480 V for metering and spot networks. To address these issues, EPRI research in 2011 concentrated on 480-V arc flash. For 480-V spot networks, research concentrated on information exchange and practices to manage arc flash in spot networks. EPRI has released the main findings of this research:
IEEE 1584 is the predominate calculation method for spot networks with utilities assuming either an 18- or 24-inch (45.7- or 61.0-cm) working distance.
Many utilities are de-energizing the feeder for spot network work. This reduces fault current and energized buswork in protectors. Note that they are not operating a primary-side oil switch.
Work is manageable in many spot networks with heavy arc suits (100 cal/cm2 suits are common).
Utilities normally assume either a self-extraction time or assume that internal network protector fuses operate. Both assumptions allow work in many spot networks with available arc flash suits. Both assumptions also have disadvantages.
External fuses or disconnects are a promising option to reduce incident energies and completely de-energize a network protector. These scenarios can be treated as open-air applications if the only exposure is line to ground.
For 480-V metering, several exploratory tests were performed on different meter styles to see if there were any units where the 20 cal/cm2 threshold would not apply. Tests showed that meters with significant internal busbar can have long durations and incident energies much higher than 20 cal/cm2.
Based on these results, utilities should not work on 480-V meters with significant busbar that are energized without an analysis.