Home

BURNDY® Announces the Expanded Line of HYREDUCERâ„¢ Kits (YSR-TC)

Aug. 18, 2010

August 18, 2010 -- BURNDY®, a manufacturer and provider of connector solutions to the industrial, energy, construction, telecommunication, petrochemical, data center, and transportation industries, announces the expanded line of HYREDUCERâ„¢ (YSR-TC) In-line Splice Reducer Product Line. Originally designed for the telecommunication industry to provide better wire management solutions when reducing conductors with irreversible compression connectors, other industries have seen the benefits and to answer these needs, BURNDY has expanded the line. These connector kits provide an in-line reduction of two conductors while keeping space requirements to a minimum.

The HYREDUCERâ„¢ kits are pre-package with the YSR-TC connector, heavy duty clear Telcordia GR-347-CORE “Abrasion and Cut Test” approved heat shrink and an installation instruction sheet. All YSR-TC connectors have an inspection hole so one can visually check for a fully inserted conductor. All YSR-TC are UL Listed and CSA Certified when crimped with the approved tool and die combination, a part of the BURNDY Engineered System.

About BURNDY® Headquartered in Manchester, New Hampshire and with over 85 years of dedicated customer support in both service and product, our customers need look no further than BURNDY® for all their connector, tool, and accessory needs. BURNDY® is the only manufacturer to have the BURNDY® Engineered System of coordinating dies, connectors and tools. The three elements have been specifically designed to work together and engineered to meet stringent, accepted quality standards – allowing the user complete confidence in the integrity of the connection.

CONTACT:

For additional information, contact us at 47 E. Industrial Park Drive, Manchester, New Hampshire, 03109, call Customer Service at 1-800-346-4175, or visit our Web site at www.BURNDY.com.

About the Author

Amy Fischbach | Field Editor

Amy Fischbach is the field editor for the Electric Utility Operations section of Transmission & Distribution World. She worked for Prism Business Media (now Penton) for eight years, most recently as the managing editor of Club Industry's Fitness Business Pro magazine. She is now working as a freelance writer and editor for B2B magazines. Amy earned her bachelor's and master's degrees in journalism from Kansas State University in Manhattan, Kansas. She serves as the national vice president of the American Society of Business Publication Editors. She can be reached at [email protected].