Screen Shot 2020 03 15 At 10 43 08 Pm
Screen Shot 2020 03 15 At 10 43 08 Pm
Screen Shot 2020 03 15 At 10 43 08 Pm
Screen Shot 2020 03 15 At 10 43 08 Pm
Screen Shot 2020 03 15 At 10 43 08 Pm

Bucket Hook Features Tool Tether Connection Eye

March 16, 2020
Buckingham Manufacturing launched a new bucket hook with a tether hole, which allows for a tether to be attached for extra tool fall protection.

Buckingham’s newly designed bucket hook can fit up to a 2½-in. bucket lip and now features a tool tether connection eye. The tether connection eye allows for the Buck Tool Tether 600071 to be attached for extra tool fall protection. The tool tether is 51 in. in length.

The Tether Connection Eye is rated as an ANSI 121 Anchor Attachment, when properly attached to the bucket and when used with an ANSI 121 rated tool tether rated to ANSI 121, the American National Standard for Dropped Object Prevention Solutions. 

The bucket hook features an outside hook with a 2 ½-in. hook opening and a 40 lb. WLL (3:1 safety factor), two inside accessory hooks with a 15 lb. WLL (3:1 safety factor), and a ¾-in. inside opening.

For more information, visit the Web site

Voice your opinion!

To join the conversation, and become an exclusive member of T&D World, create an account today!