International LiDAR Mapping Forum Sets New Record for Attendees

March 1, 2012
The International LiDAR Mapping Forum (ILMF), which took place in Denver in the United States in January, set a new record for registered attendees, with 773 professionals from 30 different countries.

The International LiDAR Mapping Forum (ILMF), which took place in Denver in the United States in January, set a new record for registered attendees, with 773 professionals from 30 different countries.

Many believed this was the most successful event yet, with delegates benefiting from presentations covering government and local initiatives, as well as learning from the experiences of their industry colleagues in reports on projects which are pushing back the boundaries of LIDAR operations.

The conference‟s key note address by Dave Maune of Dewberry, along with colleagues Greg Snyder and Larry Sugarbaker of the USGS, revealed the first results of the U.S. National Elevation Assessment; a study to investigate the costs and benefits of acquiring data to geo-enable the United States in 3D. The results suggested that LIDAR surveys be conducted at 8-year intervals with a resolution of 1 to 2 points per square meter with benefits outweighing costs.

Interestingly, Ian Madin, Chief Scientist at Oregon Department of Geology and Mineral Industries presented an alternative approach; the benefits to be made by commercial ventures where interested parties could share costs to obtain common data. This could be a solution for commercial and state organizations, with each party obtaining data at a fraction of the cost of having a bespoke survey. This model could lead to an increase in LIDAR survey activities in other States, although in some sectors work loads are already at highest ever levels.

Other highly informative talks were delivered by Alastair Jenkins (GeoDigital) on using LIDAR in utility corridor mapping to meet the significant regulatory requirements of the NERC Alert on power transmission lines, and there was a whole track session dedicated to Bathymetric LIDAR, which examined the use of LIDAR for mapping along coastal zones and flood plains; an area of increasing environmental concern.

New developments in technology and advances in software were well represented. Highlights were Ayman Habib's (University of Calgary) paper on comparing rigorous and quasi-rigorous approaches to LIDAR system calibration, and Andreas Ulrich's (Riegl) paper on echo digitization and full waveform analysis. This paper indicated that making use of the full pulse width and analyzing echo signals off line in full waveform can retrieve almost all useful information contained in the echo signal.

Looking to the future, a paper by Charles Toth (Ohio State University) on the advances in flash LIDAR – single photon detection LIDAR systems – demonstrated that when refined into a commercial as opposed to a, possibly, military system, will be a significant step forward in this technology. Jim Brainard (REY Engineers) proposed that the use of ground radar will soon become a key component of integrated mobile mapping LIDAR systems. Multi-sensor fusion was a major theme explored expertly by Gregor Willhauk (Trimble), Lutz Bannehr (Anhalt University, Germany) and Robert Rand (U.S. National Geo-Spatial Intelligence Agency).

The final day's session focused on the fastest growing sector of mobile mapping. Andrew Fuller (3D Laser Mapping) examined how to manage the expectations of mobile mapping systems in a number of challenging operational environments. Elliot Duff (CSIRO, Australia) demonstrated expertly how mobile mapping operations can still continue even in areas where the GPS signal is denied, by using 2D laser scanners fused with available priors to provide a trajectory solution.

Once again, partners of the International LiDAR Mapping Forum, ASPRS (American Society of Photogrammetry and Remote Sensing), held their Hot Topics session on the morning of the opening day. The Program was specially selected by the ASPRS LIDAR Division and was full with over 250 delegates keen to hear Lewis Graham, the ASPRS LIDAR Division Chair (GeoCue) discuss the recently approved LAS 1.4 data format and the work that is being done in the Mobile Mapping committee on a best practices manual. This was followed by Karl Heidemann (Airborne LIDAR Committee Chair, USGS) who offered an update on the USGS V13 LIDAR specification and the future plans of the Airborne Committee.

Voice your opinion!

To join the conversation, and become an exclusive member of T&D World, create an account today!