TLM Device Assists with Dynamic Rating and Forecasting of HV Line Capacity

May 1, 2012
Lindsey Manufacturing Co. introduces the Transmission Line Monitor (TLM) to assist with real-time rating and forecasting of high-voltage line capacity.

Lindsey Manufacturing Co. introduces the Transmission Line Monitor (TLM) to assist with real-time rating and forecasting of high-voltage line capacity.

Developed in conjunction with the Idaho National Laboratory (INL), the TLM enables electric utilities to maximize their transmission resources by calculating each line's dynamic capacity. By knowing the conductor's height clearance history for a load under specific weather conditions, operators can forecast the line capacity for similar future weather conditions with a high degree of confidence.

Company President Keith E. Lindsey says the TLM will change the way electric T&D infrastructure is maintained and managed worldwide. “This is the first ‘smart’ device of its kind delivering valuable operational information on high-voltage transmission lines,” said Lindsey. “Based on the initial INL design, our company developed ways to measure line sag, conductor temperature, and tilt and roll of the conductors, as well as the distance to any object beneath the line. We also tasked the sensors to detect Aeolian vibration, which is an indication of wind blowing across the conductor, and ‘galloping.’”

Lindsey continued, “By gathering weather history from locations around an installed TLM, line current history and exact conductor height history, utility operators can forecast 24 hours in advance how much additional line capacity is available without violating clearance regulations.”

The TLM uses Light Detection and Ranging (LiDAR) technology to accurately measure the height of the transmission line relative to crossing conductors or vegetation below the line. Its onboard sensor package incorporates two temperature sensors: one measures conductor temperature up to 250°C in real time and the other measures ambient temperature. A pair of dual-axis MEMS (micro electro-mechanical system) accelerometers measures the vibration characteristics of the transmission line and determines its tilt and roll.

Each TLM is remotely programmable, has a GPS address and communicates in a self-healing wireless mesh network over the 915-MHz band. Data from the device are encrypted compliant with the National Institute of Standards and Technology AES 256-bit standard, and are available at the endpoint ground location in DNP3 format, which integrates to most installed smart grid communication systems.

Visit www.lindsey-usa.com.

Voice your opinion!

To join the conversation, and become an exclusive member of T&D World, create an account today!